Skip to main content
NetApp Knowledge Base

Various scsi.cmd errors on Fabric MetroCluster

  1. Last updated
  2. Save as PDF
Views:
1,334
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
MetroCluster
Last Updated:

Applies to

  • Fabric MetroCluster
  • ONTAP 9

Issue

The EMS log lists various different scsi.cmd errors from all nodes to both local and remote disks.

Example:

Sun Jun 06 03:15:30 [SiteA-n1: slifc_intrd: scsi.cmd.abortedByHost:error]: Enclosure services device siteA-switch1:6.126L51: Command aborted by host adapter: HA status 0x4: cdb 0x1c. 
Sun Jun 06 03:15:30 [SiteA-n1: slifc_intrd: scsi.cmd.checkCondition.bridge.SAS.victim:debug]: Enclosure services device siteA-switch2:9.126L51: Check Condition: CDB 0x1c: Sense Data SCSI:aborted command -  (0xb - 0x88 0x5 0x6)(11925).
Sun Jun 06 21:05:02 [SiteA-n1: slifc_intrd: scsi.cmd.abortedByHost:error]: Disk device siteB-switch2:7.126L27: Command aborted by host adapter: HA status 0x4: cdb 0x2a:8bb0a640:0008. 
Sun Jun 06 21:05:09 [SiteA-n1: slifc_asyncd_1: scsi.cmd.selectionTimeout:error]: Enclosure services device siteB-switch2:9.126L51: Adapter/target error: HA status 0x7: cdb 0xe0. Targeted device did not respond to requested I/O. I/O will be retried. 
Sun Jun 06 17:08:16 [SiteA-n1: slifc_intrd: scsi.cmd.checkCondition.bridge.SAS.topoChange:debug]: Disk device siteB-switch2:7.126L44: Check Condition: CDB 0x88:000000012da82550:00000008: Sense Data SCSI:aborted command -  (0xb - 0x88 0x3 0x1)(0).
Sun Jun 06 17:08:16 [SiteA-n1: slifc_intrd: scsi.cmd.checkCondition.bridge.SAS.topoChange:debug]: Disk device siteB-switch1:9.126L39: Check Condition: CDB 0x28:4ae07ed8:0018: Sense Data SCSI:aborted command -  (0xb - 0x88 0x3 0x1)(1).
Sun Jun 06 17:08:33 [SiteA-n1: slifc_intrd: scsi.cmd.checkCondition:error]: Disk device siteB-switch1:9.126L20: Check Condition: CDB 0x12: Sense Data SCSI:illegal request -  (0x5 - 0x24 0x0 0x0)(2). 
Sun Jun 06 23:37:22 [SiteA-n1: slifc_intrd: scsi.cmd.abortedByHost:error]: Unknown device siteB-switch1:8.126L51: Command aborted by host adapter: HA status 0x4: cdb 0x12.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.