Skip to main content
NetApp Knowledge Base

MetroCluster scsi cmd targetstatus error target status busy

  1. Last updated
  2. Save as PDF
Views:
13
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • Fabric MetroCluster
  • ONTAP 9

Issue

  • The following errors are seen in EMS logs:

CL01N01: slifc_intrd: scsi.cmd.targetStatus:error]: Unknown device SWITCH01:10.126L25: Target Status Busy: cdb 0x12

  • The following errors are seen in the logs from the ATTO FibreBridge connected to SWITCH01-10:

59E9FE 13:34:29 09/12/24 INFO State chg 500a09800867999c from Good to VirtualDev_Busy
59E9FF 13:34:29 09/12/24 INFO 500a09800867999c Virtual device busy - timeout started
59EA00 13:34:29 09/12/24 INFO SAS Port A Discovery starting
59EA01 13:34:29 09/12/24 INFO SAS Port A Discovery complete

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.