Skip to main content
NetApp Knowledge Base

MetroCluster IP backend switch isl ports not trunked

  1. Last updated
  2. Save as PDF
Views:
76
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • MetroCluster IP
  • ONTAP 9
  • Cisco backend switches

Issue

The ISL ports are not trunked, show interface brief output shows that the ISL interfaces are not members of a port channel:

Ethernet        VLAN    Type Mode   Status  Reason                                 Speed     Port
Interface                                                                                    Ch #                                                                                                                        
--------------------------------------------------------------------------------
Eth1/15         1       eth  trunk  up      none                                    40G(D)    --
Eth1/16         1       eth  trunk  up      none                                    40G(D)    --
 
------------------------------------------------------------------------------------------
Port-channel VLAN    Type Mode   Status  Reason                              Speed   Protocol
Interface
------------------------------------------------------------------------------------------
Po1          1       eth  trunk  up      none                                a-100G(D)  lacp
Po10         1       eth  trunk  down    No operational members                auto(I)  none
Po11         1       eth  trunk  down    No operational members                auto(I)  none

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.