Skip to main content
NetApp Knowledge Base

MetroCluster IP ISCSI sessions down with error "Can't assign requested address"

not set
Last Updated:

Applies to

MetroCluster IP 


  • storage iscsi-initiator show reports errors for ISCSI session status: 

Cluster_A::*> storage iscsi-initiator show
mccip-aux-a-initiator up/down
              Failure Reason:  Can't assign requested address

  • metrocluster interconnect adapter show reports a MetroCluster IP interface with an address from a different subnet: 

Cluster_A::> metrocluster interconnect adapter show
                             Adapter Link
Node         Adapter Name    Type    Status  IP Address  Port Number
------------ --------------- ------- ------  ----------- -----------
node_A_1     e0a-10          iWARP   UP
node_A_1     e0b-20          iWARP   UP
node_A_2     e0a-10          iWARP   UP
node_A_2     e0b-20          iWARP   UP



Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.


  • Was this article helpful?