Skip to main content
NetApp Knowledge Base

How to troubleshoot "DomainMismatchFromNodeToShelf Alert" on MetroCluster IP

  1. Last updated
  2. Save as PDF
Views:
2
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • ONTAP 9
  • MetroCluster IP
  • NS224 Shelves - Switch attached
  • Cisco 9336C-FX2 

Description

ONTAP system health monitor reports "DomainMismatchFromNodeToShelf_Alert" on a MetroCluster IP system with switch attached NS224 shelves. 

Node ClusterA-02

Monitor system-connect
Alert ID DomainMismatchFromNodeToShelf_Alert
Alerting Resource IP_Switch_x_2
Subsystem SAS-connect_Cluster
Indication Time <date>
Perceived Severity Major
Probable Cause Configuration_error
Description The storage domain between the nodes ClusterA-01, ClusterA-02 and switch IP_Switch_x_2 is different from the domain between the switch and shelves 4.40, 4.50, 4.60, 4.70.
Corrective Actions Connect the switch IP_Switch_x_2 to both the node and the shelves with the same storage domain, following the guide applicable to your shelf.
Possible Effect This issue will affect conversions to direct-attached storage.
Additional Information Switch Name: IP_Switch_x_2
Nodes: ClusterA-01, ClusterA-02
Ports: ClusterA-01:e10a, ClusterA-02:e10a
Connected Shelves: 4.40, 4.50, 4.60, 4.70
Nodes Connected to Switch Port Range A: ClusterA-01, ClusterA-02
Nodes Connected to Switch Port Range B:
Alerting Resource Name Switch name: IP_Switch_x_2

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.