Skip to main content
NetApp Knowledge Base

ClusterIfOutErrorsWarn_Alert reported against MetroCluster IP node interface

Last Updated:

Applies to

  • MetroCluster IP
  • Firmware 9.3(5)


Event log is reporting the following

[nodei-01: mgwd:]: Call home for Health Monitor process cshm: ClusterIfOutErrorsWarn_Alert[Switch1 (XX)/Ethernet1/10].

CRC errors reported when running the commanbd  ifstat -a on the local node
-- interface  e1b  (36 days, 9 hours, 15 minutes, 11 seconds) --

Total frames:    21577m | Frames/second:    6864  | Total bytes:     30527g
Bytes/second:     9710k | Total errors:        3  | Errors/minute:       0
Total discards:      0  | Discards/minute:     0  | Multi/broadcast:   743k
Non-primary u/c:     0  | CRC errors:          3  | Long frames:         0
Jabber:              0  | Length errors:       0  | No buffer:           0
Pause:               0  | Jumbo:            4523m | Error symbol:        0
Bus overruns:        0  | LRO segments:     1265m | LRO bytes:       10053g
LRO6 segments:       0  | LRO6 bytes:          0  | Bad UDP cksum:       0
Bad UDP6 cksum:      0  | Bad TCP cksum:       0  | Bad TCP6 cksum:      0
Mcast v6 solicit:    0  | Lagg errors:         0  | Lacp errors:         0
Lacp PDU errors:     0

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.