Skip to main content
NetApp Knowledge Base

CRC errors are observed on ports connected to BES-53248 switch

Last Updated:

Applies to

  • ONTAP 9
  • MetroCluster IP or Cluster
  • BES-53248 


  Following errors are reported on ems log:
[intr: netif.linkErrors:error]: Excessive link errors on network interface e0a. Might indicate a bad cable, switch port, or NIC, or that a cable connector is not fully inserted in a socket. On a 10/100 port, might indicate a duplex mismatch.
[vifmgr: vifmgr.cluscheck.crcerrors:alert]: Port e0a on node affnode is reporting a high number of observed hardware errors, possibly CRC errors.



Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.


  • Was this article helpful?