Skip to main content
NetApp Knowledge Base

Unable to migrate Array lun greater than 16 TB using FLI

  1. Last updated
  2. Save as PDF
Views:
166
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
SAN
Last Updated:

Applies to

  • ONTAP 9.x
  • FC

Issue

  • Getting below error in storage errors show for array LUN greater than 16 TB:
Disk: DGC-1.x
UID: 600601xx:E1BxxE00:412336xx:3D4DxxCE:00000000:00000000:00000000:00000000:00000000:00000000
--------------------
This array LUN is too large and is not usable. The maximum array LUN size supported is 16000 GB.
  • storage disk show reports the disk in broken state 

CxL-NExxxP-xxx::*> storage disk show -array-name DGx_LUxZ_1 -fields disk,serial-number,container-type,owner,path-lun-in-use-count,import-in-progress,is-foreign
disk    owner is-foreign container-type import-in-progress path-lun-in-use-count serial-number
------- ----- ---------- -------------- ------------------ --------------------- --------------------------------

DGC-1.4 -     false      broken         false              0,0,0,0               6006xx604BB1490xxxD44E5C9E172DED

  • Setting the bootargs value in nodeshell did not resolve the issue

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.