Skip to main content
NetApp Knowledge Base

Tape drive check condition spam despite deleted FC LIF

  1. Last updated
  2. Save as PDF
Views:
92
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

Applies to

  • ONTAP 9
  • FC
  • Tape drives

Issue

  • When decommissioning FC services in ONTAP, check condition spam is observed in EMS:
isp2400_intrd: scsi.cmd.checkCondition:error]: Unknown device switch:23.126L1: Check Condition: CDB 0x12: Sense Data SCSI:not ready -  (0x2 - 0x4 0x12 0x0)(998).
slot 0: FC Host Adapter 0g (QLogic 8324 rev. 2, N-port, <UP>)
Firmware rev:      8.9.1
Flash rev:         5.0.2
Host Port Id:      0xb0100
FC Node Name:      xxxx
FC Port Name:      xxxx
SFP Vendor:        AVAGO
SFP Part Number:   AFBR-57F5MZ-NA1
SFP Serial Number: xxxx
SFP Capabilities:  4, 8 or 16 Gbit
Link Data Rate:    16 Gbit
Switch Port:       switch:8
switch:22.126 Tape:  Hewlett-Packard LTO-6 25FS (serial)
switch:23.126 Tape:  Hewlett-Packard LTO-6 25FS (serial)
  • storage port show indicates the port is online
  • FC stats output confirms, no link issues

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.