Skip to main content
NetApp Knowledge Base

Storage rescan takes hours to complete

  1. Last updated
  2. Save as PDF
Views:
163
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

Applies to

  • ONTAP 9
  • SAN
  • VMware

Issue

  • Rescanning the storage on the ESXi host takes hours to complete
  • vmkernel log is flooded with the following errors:
2022-12-07T11:59:06.374Z cpu28:2098185)qlnativefc: vmhba68(b:0.0): C0:T3:L27 - FCP command status: 0x5-0x0 (0x8) portid=021c01 oxid=0x382 cdb=a30a00 len=3064 rspInfo=0x0 resid=0x0 fwResid=0x0 host status = 0x8 device status = 0x0
2022-12-07T11:59:06.374Z cpu28:2098185)NMP: nmp_ThrottleLogForDevice:3863: Cmd 0xa3 (0x45ba80ee33c0, 0) to dev "naa.600a09803831372d513f4e6a48xxxxxx" on path "vmhba68:C0:T3:L27" Failed:
2022-12-07T11:59:06.374Z cpu28:2098185)NMP: nmp_ThrottleLogForDevice:3872: H:0x8 D:0x0 P:0x0 Invalid sense data: 0x0 0x0 0x0. Act:NONE. cmdId.initiator=0x451a4e79bb28 CmdSN 0x0
 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.