Skip to main content
NetApp Knowledge Base

ISL port on Brocade switch showing no sync

Views:
22
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
hw
Last Updated:

Applies to

  • MetroCluster FC
  • Brocade Switch
  • ONTAP 9

Issue

  • No Sync showing on switch port

switchshow :
switchName: switch1
switchType: 162.5
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 7
switchId: fffc07
switchWwn: 10:00:00:00:00:a0:0a:00
zoning: ON 
switchBeacon: OFF
FC Router: OFF
HIF Mode: OFF
Index Port Address Media Speed State Proto
==================================================

40  40   050000   id    32G     No_Sync     FC  LE

  • Low RX power on switch port

sfpshow:

=============
Port 40:
=============
Identifier: 3 SFP
Connector: 7 LC
Transceiver: 6801001200000000 8,16,32_Gbps SM lw Long_dist
Vendor PN: 57-1000332-01
Vendor Rev: A
Wavelength: 1310 (units nm)
Temperature: 43 Centigrade
Current: 39.202 mAmps
Voltage: 3345.1 mVolts
RX Power: -31.0 dBm (0.8 uW)
TX Power: 0.8 dBm (1189.4 uW)

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.