Skip to main content
NetApp Knowledge Base

"DomainMismatchFromNodeToShelf_Alert" is reported on MetroCluster IP switch

  1. Last updated
  2. Save as PDF
Views:
196
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
metrocluster
Last Updated:

Applies to

  • ONTAP 9
  • MetroCluster IP
  • NS224 Shelves - Switch attached
  • Cisco 9336C-FX2 

Issue

"DomainMismatchFromNodeToShelf_Alert" is reported on MetroCluster IP switch:
 
 
Node ClusterA-02
Monitor system-connect
Alert ID DomainMismatchFromNodeToShelf_Alert
Alerting Resource Switch-04
Subsystem SAS-connect_Cluster
Indication Time Fri Jul 25 08:52:47 2025
Perceived Severity Major
Probable Cause Configuration_error
Description The storage domain between the nodes ClusterA-01, ClusterA-02 and switch Switch-04 is different from the domain between the switch and shelves 4.40, 4.50, 4.60, 4.70.
Corrective Actions Connect the switch Switch-04 to both the node and the shelves with the same storage domain, following the guide applicable to your shelf.
Possible Effect This issue will affect conversions to direct-attached storage.
Additional Information Switch Name: Switch-04
Nodes: ClusterA-01, ClusterA-02
Ports: ClusterA-01:e10a, ClusterA-02:e10a
Connected Shelves: 4.40, 4.50, 4.60, 4.70
Nodes Connected to Switch Port Range A: Switch-03, Switch-04
Nodes Connected to Switch Port Range B:
Alerting Resource Name Switch name: Switch-04

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.