Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 15 results
    • Move volume follows the error : Cannot perform efficiency operations on deprioritized volume
      https://kb.netapp.com/on-prem/ontap/DM/Efficiency/Efficiency-KBs/Move_volume_follows_the_error___Cannot_perform_efficiency_operations_on_deprioritized_volume
      Applies to ONTAP 9 Issue Run the volume move on the system manager following the below error: ONTAP API Failed: Failed to modify efficiency configuration for volume "volname" of Vserver "svmname": Can...Applies to ONTAP 9 Issue Run the volume move on the system manager following the below error: ONTAP API Failed: Failed to modify efficiency configuration for volume "volname" of Vserver "svmname": Cannot perform efficiency operations on deprioritized volume. To be able to perform efficiency operations, run "volume efficiency promote" command first. By the SIS-STATUS-L.XML of AutoSupport, the Auto State of the volume is Deprioritized .
    • Unable to move load-sharing destination volume by using "volume move" command
      https://kb.netapp.com/on-prem/ontap/DP/SnapMirror/SnapMirror-KBs/Unable_to_move_load_sharing_destination_volume_by_using_volume_move_command
      Applies to ONTAP 9 Load-sharing mirror Issue volume move command against a load-sharing destination volume fails ::> volume move start -volume <LOAD-SHARING DESTINATION VOLUME> -destination-aggregate ...Applies to ONTAP 9 Load-sharing mirror Issue volume move command against a load-sharing destination volume fails ::> volume move start -volume <LOAD-SHARING DESTINATION VOLUME> -destination-aggregate <AGGREGATE> Error: command failed: You cannot move a load-sharing destination volume. Instead, create a new load-sharing destination volume in the correct location. Then delete the load-sharing destination volume that you attempted to move.
    • During volume move, wafl.raid.incons.set.error message generated
      https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/During_volume_move_wafl_raid_incons_set_error_message_generated
      While moving the volume, an inconsistency is reported and the vol move operation gets failed. A file system inconsistency was detected replicating data from volume "CAEAUA1601://vs1/vol1". Encryption ...While moving the volume, an inconsistency is reported and the vol move operation gets failed. A file system inconsistency was detected replicating data from volume "CAEAUA1601://vs1/vol1". Encryption Key ID of Source Volume: At any point during a volume move operation, a wafl.raid.incons.set.error message is generated: Message: wafl.raid.incons.set.error: Data block in private inode (fileid: 30689 snapid: 0 fbn: 1730008207 level: 0) in volume vol1 marked with error (120) by VSM.
    • Volume move failure "Moving a volume undergoing transition is not supported"
      https://kb.netapp.com/on-prem/ontap/DP/SnapMirror/SnapMirror-KBs/Volume_move_failure_Moving_a_volume_undergoing_transition_is_not_supported
      Applies to ONTAP 9.x SnapMirror (type-TDP) Volume Move Issue Moving a SnapMirror type-TDP destination volume fails with error : “Cannot move volume "vol_name" in Vserver "svm_name". Reason: Moving a v...Applies to ONTAP 9.x SnapMirror (type-TDP) Volume Move Issue Moving a SnapMirror type-TDP destination volume fails with error : “Cannot move volume "vol_name" in Vserver "svm_name". Reason: Moving a volume undergoing transition is not supported. Use "snapmirror show -type TDP" to get the status of the volume transition operation.”
    • Volume move fails after stopping volume clone split
      https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/Volume_move_fails_after_stopping_volume_clone_split
      After stopping a volume clone split operation, volume move start commands fail: Error: command failed: Cannot move volume "test_clone" in Vserver "svm1". Reason: The volume is undergoing a FlexClone s...After stopping a volume clone split operation, volume move start commands fail: Error: command failed: Cannot move volume "test_clone" in Vserver "svm1". Reason: The volume is undergoing a FlexClone split operation. Use the "volume clone split show" command to monitor the split operation for completion, or use the "volume clone split stop" command to stop the split operation. The volume clone split status command shows all zeroes:
    • Troubleshooting Workflow: Volume Move
      https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/Troubleshooting_Workflow_Volume_Move
      This flowchart helps you with solving issues related to moving volumes in ONTAP 9. The flowchart covers issues that may arise in any of the three stages of moving volumes - (a) before you move a volum...This flowchart helps you with solving issues related to moving volumes in ONTAP 9. The flowchart covers issues that may arise in any of the three stages of moving volumes - (a) before you move a volume, (b) during the process of moving a volume, and (c) after you have finished moving a volume. This covers almost all types of issues that you may face as you move a volume  in ONTAP 9.
    • Volume Move fails with "Snapshot operation failed: No space left on device"
      https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/Volume_Move_fails_with_Snapshot_operation_failed__No_space_left_on_device
      Volume Move Volume move operation fails with "Snapshot operation failed: No space left on device" error Status stay in "Volume move job preparing transfer" Cluster::*> vol move show -vserver xxx -volu...Volume Move Volume move operation fails with "Snapshot operation failed: No space left on device" error Status stay in "Volume move job preparing transfer" Cluster::*> vol move show -vserver xxx -volume vol_xxx -instance Volume Name: vol_xxx Time Move Job Last Entered Cutover: - Detailed Status: Volume move job preparing transfer Error: Creating Snapshot copy with owner tag: Snapshot operation failed: No space left on device. Internal Progress of Move: Volume move job preparing transfer
    • How to delete an aggregate from the object store after moving the volumes to new aggregate?
      https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/How_to_delete_an_aggregate_from_the_object_store_after_moving_the_volumes_to_new_aggregate
      Applies to ONTAP 9.7 FabricPool Aggregate deletion Description You cannot detach an object store bucket from the FabricPool configuration after it is attached. To detach an unused aggregate from the o...Applies to ONTAP 9.7 FabricPool Aggregate deletion Description You cannot detach an object store bucket from the FabricPool configuration after it is attached. To detach an unused aggregate from the object store, the aggregate has to be deleted from the ONTAP side.
    • Slow performance of volume move operation on ONTAP 9
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Slow_performance_of_volume_move_operation_on_ONTAP_9
      Applies to ONTAP 9 Issue Slow performance of volume move operation Volume move may appear stuck at 98% complete
    • ONTAP displays "Warning: Cannot preserve the caching policy " when performing volume move
      https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/ONTAP_displays_Warning__Cannot_preserve_the_caching_policy_when_performing_volume_move
      The following warning is displayed when moving a volume from a flash pool aggregate: ::> volume move start -vserver svm1 -volume vol1 -destination-aggregate aggr1 Warning: Cannot preserve the caching ...The following warning is displayed when moving a volume from a flash pool aggregate: ::> volume move start -vserver svm1 -volume vol1 -destination-aggregate aggr1 Warning: Cannot preserve the caching policy associated with volume "vol1" in the destination aggregate "aggr1". If you continue, caching policy will be disabled in the destination. The above warning can also be displayed while moving a volume from a FAS system with a flash pool to an aggregate on AFF system.
    • Volume Move fails with "volume move is waiting for deletion of unreferenced objects"
      https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/Volume_Move_fails_with_volume_move_is_waiting_for_deletion_of_unreferenced_objects
      Volume Move operations fail with error: ::> volume move show -instance Volume Name: svm01_vol1 Detailed Status: Cutover Completed::Volume move job finishing move Error: Volume move is waiting for dele...Volume Move operations fail with error: ::> volume move show -instance Volume Name: svm01_vol1 Detailed Status: Cutover Completed::Volume move job finishing move Error: Volume move is waiting for deletion of unreferenced objects to complete on the capacity tier Duration of Move: 1 days 03:54 Start Time of Move: Wed May 26 06:30:42 2021 Is Source Volume Encrypted: false Encryption Key ID of Source Volume: Is Destination Volume Encrypted: false Encryption Key ID of Destination Volume: