Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 4 results
    • ESXi host fails to mount iSCSI datastore
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/ESXi_host_fails_to_mount_iSCSI_datastore
      Applies to ONTAP 9 iSCSI ESXi Issue iSCSI LUN not being able to be mounted by ESXi hosts Initiator status show (not logged in) on output of igroup show -instance cluster1::> igroup show -instance Vser...Applies to ONTAP 9 iSCSI ESXi Issue iSCSI LUN not being able to be mounted by ESXi hosts Initiator status show (not logged in) on output of igroup show -instance cluster1::> igroup show -instance Vserver Name: svm0 Igroup Name: iscsi_vmware_xxx_igroup Protocol: iSCSI OS Type: vmware Portset Binding Igroup: - Igroup UUID: a84216dc-xxxx-xxxx-xxxx-005056a4fd7d ALUA: true Initiators: iqn.1998-01.com.vmware:xxxx:87015xxxx:65 (not logged in)
    • Logical interface creation with service policy default-data-nvme-tcp fails
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Logical_interface_creation_with_service_policy_default-data-nvme-tcp_fails
      Error: command failed: Cannot create LIF "lif_svm0_1" on Vserver "svm0" with data protocols "-" because this list of data protocols is inconsistent with service policy "default-data-nvme-tcp". Try the...Error: command failed: Cannot create LIF "lif_svm0_1" on Vserver "svm0" with data protocols "-" because this list of data protocols is inconsistent with service policy "default-data-nvme-tcp". Try the command again without specifying a data protocol list and the system will populate this setting automatically based on the specified service policy.
    • Vscan disconnected due to network interface service-policy not allowing CIFS access
      https://kb.netapp.com/on-prem/ontap/da/NAS/NAS-KBs/Vscan_disconnected_due_to_network_interface_service-policy_not_allowing_CIFS_access
      Applies to VSCAN VSCAN shows disconnected with disconnect Reason "-" ::> vscan connection-status show-all -node node1 -vserver svm1 (vserver vscan connection-status show-all) Vserver Node Server Statu...Applies to VSCAN VSCAN shows disconnected with disconnect Reason "-" ::> vscan connection-status show-all -node node1 -vserver svm1 (vserver vscan connection-status show-all) Vserver Node Server Status Disconnect Reason svm1 node1 x.x.x.x disconnected - Fri Jan 14 15:36:57 +0100 [node1: nblade2: Nblade.vscanNoScannerConn:EMERGENCY]: Vserver "svm1" has no virus scanner connection. ONTAP AV Connector connection test and ping test between the SVM and Vscan server are successful
    • Unable to restrict SSH access to specific IP using firewall policy
      https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/Unable_to_restrict_SSH_access__to_specific_IP_using_firewall_policy
      Applies to ONTAP 9.6 and later Issue After upgrading ONTAP to version 9.7 SSH entry is missing when trying to create/modify firewall policy . How to apply a certain policy that will provide specific a...Applies to ONTAP 9.6 and later Issue After upgrading ONTAP to version 9.7 SSH entry is missing when trying to create/modify firewall policy . How to apply a certain policy that will provide specific access to SSH by an IP Address?