ONTAP 9 Service processor (SP) Baseboard Management Controller (BMC) The status of SP/BMC shows as rebooting after a maintenance activity: Cluster::> system service-processor show Node Type Status IP ...ONTAP 9 Service processor (SP) Baseboard Management Controller (BMC) The status of SP/BMC shows as rebooting after a maintenance activity: Cluster::> system service-processor show Node Type Status IP Configured FirmwareVersion IP Address FAS8200-01 BMC rebooting true 13.4P2 1.2.3.4 FAS8200-02 BMC online true 13.4P2 1.2.3.5 The same status is observed from sysconfig -a output as well: ::> system node run -node <node> -command sysconfig -a Service Processor Status: Rebooting
A storage node appliance going through maintenance activity like an upgrade or a SG6000-CN headswap fails to boot and stuck in "Rebooting" stage within the management interface. There are less than (4...A storage node appliance going through maintenance activity like an upgrade or a SG6000-CN headswap fails to boot and stuck in "Rebooting" stage within the management interface. There are less than (4) host ports (SG6060 or SGF6024) or less than (2) host ports (SG5712, SG5760), OR if the "Label" string for any of the host ports is not equal to the "Host Port" string NOTE: The SG6000 series uses 4 host ports while the SG5700 series has only 2 host ports