Applies to ONTAP 9 DellEmc Networking OS10 10.5.2.3 Dell PowerSwitch S4148U-ON Issue All the FC ports go down and cannot login to fabric, when an ethernet cable is replaced on unified switch. EMS logs...Applies to ONTAP 9 DellEmc Networking OS10 10.5.2.3 Dell PowerSwitch S4148U-ON Issue All the FC ports go down and cannot login to fabric, when an ethernet cable is replaced on unified switch. EMS logs: Wed Jun 09 16:23:41 0200 [nodexx fct_tpd_work_thread_0: scsitarget.slifct.linkBreak:error]: Link break detected on Fibre Channel target HBA 2c with event status 1 , topology type 1, status1 0x0, status2 0x0.
After a reboot while running ONTAP 9.6+ some ports go down for a Intel 10G Ethernet IX1-SFP+ card. Example of outputs for the "sysconfig -a". In the second one, the ifgroup changes to "partial" with o...After a reboot while running ONTAP 9.6+ some ports go down for a Intel 10G Ethernet IX1-SFP+ card. Example of outputs for the "sysconfig -a". In the second one, the ifgroup changes to "partial" with one port down.
During an ONTAP upgrade the cluster ports e3a and e3b are down on the updated node, the HA partner node is stuck in waiting for giveback. netif.sfpNotSupported: The SFP+ or QSFP+ module (not supported...During an ONTAP upgrade the cluster ports e3a and e3b are down on the updated node, the HA partner node is stuck in waiting for giveback. netif.sfpNotSupported: The SFP+ or QSFP+ module (not supported ) installed in e3a is not supported with this network interface. Not upgraded node shows ports up. ::> system node run -node not_updated_node -command sysconfig -a Example:
Both ports are physically connected to different switches and different networks ERROR net.ifgrp.lacp.link.inactive: ifgrp a1d, port e3a has transitioned to an inactive state. ERROR net.ifgrp.lacp.lin...Both ports are physically connected to different switches and different networks ERROR net.ifgrp.lacp.link.inactive: ifgrp a1d, port e3a has transitioned to an inactive state. ERROR net.ifgrp.lacp.link.inactive: ifgrp a1d, port e3b has transitioned to an inactive state. ::> net port ifgrp show -node <node_name> -ifgrp <ifgrp_name> -instance ::> net port show -node <node_name> -port <port_name> -instance Switch port SFP re-seating/replacing to no avail Using different switch port to no avail
