Ontap EMS logs will show close to 18 minutes delay between Object Store going unavailable and back to available In the latter situation the total time of Object Store being unavailable is 20 minutes (...Ontap EMS logs will show close to 18 minutes delay between Object Store going unavailable and back to available In the latter situation the total time of Object Store being unavailable is 20 minutes (2 minutes for the first Unavailable message + 18 minutes later for the Available message) Usual behavior is that a HEAD call is made after going unavailable, which unless there is a more serious issue will be successful and the Object Store will be marked Available again with 1-2 seconds.
Last Transfer Error: Failed to fetch status information for volume "netapp-backup-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx:/objstore/svm_The_CBS_Destination". The failure can be attributed to either the volum...Last Transfer Error: Failed to fetch status information for volume "netapp-backup-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx:/objstore/svm_The_CBS_Destination". The failure can be attributed to either the volume being restricted, offline, infrastructure timeouts or memory allocation failures. (Failed to get attributes for endpoint "netapp-backup-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx:/objstore/svm_The_CBS_Destination".)
Applies to Cloud Volume ONTAP (CVO) Amazon Web Services (AWS) NetApp FabricPool Issue Multiple EMS alerts triggering daily: object.store.unavailable: Unable to connect to the object store "S3Bucket" f...Applies to Cloud Volume ONTAP (CVO) Amazon Web Services (AWS) NetApp FabricPool Issue Multiple EMS alerts triggering daily: object.store.unavailable: Unable to connect to the object store "S3Bucket" from node
Applies to BlueXP Cloud Backup Service (CBS) Backup and Recovery DataLock and Ransomware protection Issue BlueXP backups in Cloud Object-store for a given volume have many more backups than set in the...Applies to BlueXP Cloud Backup Service (CBS) Backup and Recovery DataLock and Ransomware protection Issue BlueXP backups in Cloud Object-store for a given volume have many more backups than set in the Protection Policy. Example DataLock Backup Policy:
7/27/2021 02:49:30 node2 EMERGENCY object.store.unavailable: Unable to connect to the object store "FabricPool_aggr5" from node 123456abcde6543. [kern_mgwd:info:2284] 06543ff00: 54321ed0000000256: ERR...7/27/2021 02:49:30 node2 EMERGENCY object.store.unavailable: Unable to connect to the object store "FabricPool_aggr5" from node 123456abcde6543. [kern_mgwd:info:2284] 06543ff00: 54321ed0000000256: ERR: MGWD::aggr_object_store_config_iterator: object_store_config_ksmf_op:src/tables/aggr_object_store_config.cc:2480 object_store_config_ksmf_iterator::create() returned error (701:30): "Cannot verify the certificate given by the object store server.
Applies to Fabric Pool Description The storage aggregate object-store show-space command displays information about the amount of space used in the object store for each of the aggregates in FabricPoo...Applies to Fabric Pool Description The storage aggregate object-store show-space command displays information about the amount of space used in the object store for each of the aggregates in FabricPool. The used space is displayed in both absolute size as well as a percentage of the FabricPool license limit.
Applies to Cloud Volumes ONTAP Azure Issue CVO is stuck in a boot loop with error message and can be seen from Azure CVO HA VM serial console: pha.obj.scanFailure:error]: ONTAP could not get a list of...Applies to Cloud Volumes ONTAP Azure Issue CVO is stuck in a boot loop with error message and can be seen from Azure CVO HA VM serial console: pha.obj.scanFailure:error]: ONTAP could not get a list of objects from the object store, "object_store", at "rootsaxxxx.blob.core.windows.net", using IP address "10.x.x.x with error: The specified resource does not exist. Pageblob object store is NOT found and/or fm_run0: no local disks found & OFW channel is not up
Applies to ONTAP OnCommand System Manager 9.x pre-9.7P10 or 9.8 releases FabricPool (Cloud Tiers) Issue While adding or editing a FabricPool cloud tier in ONTAP System Manager, the server name (FQDN) ...Applies to ONTAP OnCommand System Manager 9.x pre-9.7P10 or 9.8 releases FabricPool (Cloud Tiers) Issue While adding or editing a FabricPool cloud tier in ONTAP System Manager, the server name (FQDN) is considered invalid. The cloud tier object store configuration cannot be saved in ONTAP System Manager. The following error is returned:
Applies to BlueXP backup for Apps DataLock and Ransomware protection Issue BlueXP backup for Apps for a given volume has a daily snapshot retention set to retain 32 snapshots but instead over 40 snaps...Applies to BlueXP backup for Apps DataLock and Ransomware protection Issue BlueXP backup for Apps for a given volume has a daily snapshot retention set to retain 32 snapshots but instead over 40 snapshots can be seen.