Post SFP replacement or hardware swap, the adapter is stuck in a hung state and does not allow connection despite being Online/UP. 1, N-port, <UP>) Board name: 111-03648 Serial Number: 1111111111 Firm...Post SFP replacement or hardware swap, the adapter is stuck in a hung state and does not allow connection despite being Online/UP. 1, N-port, <UP>) Board name: 111-03648 Serial Number: 1111111111 Firmware rev: 11.4.277.0 Host Port Id: 0x30b00 FC Node Name: 1:000:101010:111000 FC Port Name: 1:000:010101:000111 SFP Vendor: FINISAR CORP. SFP Part Number: FTLF8532P4BCV-N1 SFP Serial Number: P65ALNP SFP Capabilities: 8, 16 or 32 Gbit Link Data Rate: 32 Gbit Switch Port: ?
Applies to FC initiator port HP MSL 1/8 G2 Autoloader Tape Drive IBM Quantum i3 Tape Library FC initiator port does not come up, when it's directly connected to the tape drive: slot 0: FC Host Adapter...Applies to FC initiator port HP MSL 1/8 G2 Autoloader Tape Drive IBM Quantum i3 Tape Library FC initiator port does not come up, when it's directly connected to the tape drive: slot 0: FC Host Adapter 0e (QLogic 8324 rev. 2, L-port, <OFFLINE (hard)>) SFP Capabilities: 4, 8 or 16 Gbit Port State: enabled Port Status: offline Tape drive speed is set to 8G, ONTAP port is auto-negotiated Tape drive is compatible FC port is configured as an initiator SFP and cable were reseated/replaced
