Applies to AFF-A700 ONTAP 9.6 LUNs connected via Fibre Channel (FC) Windows hosts Issue After a change in the fabric (e.g. disconnecting a device), hosts unexpectedly disconnect from their LUNs Hosts ...Applies to AFF-A700 ONTAP 9.6 LUNs connected via Fibre Channel (FC) Windows hosts Issue After a change in the fabric (e.g. disconnecting a device), hosts unexpectedly disconnect from their LUNs Hosts do not reconnect automatically, and have to be rebooted
Applies to NetApp AFF-A200 Brocade Fibre Channel (FC) switches Windows and VMware ESXi hosts Issue When a host connected to NetApp storage via Brocade FC switches reboots, other hosts may lose connect...Applies to NetApp AFF-A200 Brocade Fibre Channel (FC) switches Windows and VMware ESXi hosts Issue When a host connected to NetApp storage via Brocade FC switches reboots, other hosts may lose connection to their NetApp FC LUNs
High CPU in HOST domain, viewing TOP-BS from Weekly AutoSupports in Active IQ shows top consumer is CSM BTLS PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 2402 root 1 -16 - 0K 20K CPU3 ...High CPU in HOST domain, viewing TOP-BS from Weekly AutoSupports in Active IQ shows top consumer is CSM BTLS PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 2402 root 1 -16 - 0K 20K CPU3 3 39.0H 74.76% CSM BTLS 2404 root 1 -16 - 0K 20K CPU0 0 39.0H 73.58% CSM BTLS 2401 root 1 -16 - 0K 20K RUN 0 38.9H 73.49% CSM BTLS 2403 root 1 -16 - 0K 20K CPU2 2 38.9H 72.61% CSM BTLS
The lifs and physical ports are up and online on NetApp end, the same can be verified using fcp adapter show and net int show command Some of the ESXi host initiators are not logged in to all the targ...The lifs and physical ports are up and online on NetApp end, the same can be verified using fcp adapter show and net int show command Some of the ESXi host initiators are not logged in to all the target LIF. fcp initiator.xml log shows the host not logged in using the lifs of all the nodes of the cluster Toggle the switch port connected to host initiator and verify, This can be done using portdisable command on Brocade switch and shutdown command on Cisco switch.
Applies to ONTAP 9.x AIX 7.2 Issue Moved two metrocluster nodes from cluster to another physical site Nodes were rebooted, MCC switchiover and switchback After switchback lun is not accessible by AIX ...Applies to ONTAP 9.x AIX 7.2 Issue Moved two metrocluster nodes from cluster to another physical site Nodes were rebooted, MCC switchiover and switchback After switchback lun is not accessible by AIX host 7.2
