Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 2 results
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Current_cluster_configuration_is_not_supported_Reason__MetroCluster_with_Fibre_Channel_FC_is_not_supported
      Applies to Ontap 9 MetroCluster Issue When setting up a re-purposed cluster, you receive the following error when trying to create an aggregate: The current cluster configuration is not supported. Rea...Applies to Ontap 9 MetroCluster Issue When setting up a re-purposed cluster, you receive the following error when trying to create an aggregate: The current cluster configuration is not supported. Reason: MetroCluster with Fibre Channel (FC) is not supported.
    • https://kb.netapp.com/on-prem/ontap/mc/MC-KBs/Option_6_resets_ha-config_from_mcc_or_mccip_to_ha_during_boot_recovery_process_in_4-node_MetroCluster
      During a maintenance that requires the boot_recovery procedure to be performed (ARL headswap, boot device replacement) on an AFF A400 or FAS8300 running 9.7.X in a 4-node Metrocluster configuration, t...During a maintenance that requires the boot_recovery procedure to be performed (ARL headswap, boot device replacement) on an AFF A400 or FAS8300 running 9.7.X in a 4-node Metrocluster configuration, the backup configuration file must be restored onto the new boot media prior to booting back into ONTAP on the affected node.