Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 5 results
    • https://kb.netapp.com/Legacy/NetApp_HCI/OS/How_to_change_ring_buffer_size_of_vmnics_on_HCI_compute_nodes
      Applies to NetApp H-series compute node VMware ESXi Description This article describes the procedure for changing the ring buffer size of vmnics on HCI compute nodes to address issues such as Receive ...Applies to NetApp H-series compute node VMware ESXi Description This article describes the procedure for changing the ring buffer size of vmnics on HCI compute nodes to address issues such as Receive Missed Errors. Note: This involves using esxcli network command of ESXi, so if more details are needed about the command, please contact VMware support.
    • https://kb.netapp.com/Legacy/NetApp_HCI/Hardware/How_to_disable_SSDP_protocol_from_running_on_H610-series
      Applies to NetApp H610S NetApp H610C NetApp H615C Simple Service Discovery Protocol (SSDP) Description This article describes the procedure to disable SSDP service UDP/1900 on a Quanta-based nodes.
    • https://kb.netapp.com/on-prem/solidfire/Element_OS_Kbs/SolidFire_and_HCI_upgrades_unable_to_start_due_to_upgrade_package_upload_error
      Upload of the upgrade package fails thus preventing SolidFire and HCI upgrades to start.
    • https://kb.netapp.com/on-prem/solidfire/hardware_Kbs/Volt_P3V_BAT_Voltage_Lower_Critical_in_HCI
      Applies to NetApp H610 series Issue The following alerts are presented in the BMC System Event Log (SEL): Volt_P3V_BAT Voltage Lower Critical - Going Low (Reading: 2.520 Volts/ Threshold: 2.520 Volts)...Applies to NetApp H610 series Issue The following alerts are presented in the BMC System Event Log (SEL): Volt_P3V_BAT Voltage Lower Critical - Going Low (Reading: 2.520 Volts/ Threshold: 2.520 Volts) - Asserted Event ######## 'Sensor 215 type voltage, Description System Board 1 Volt_P3V_BAT state assert for Part Name/Number H615C 31S5BMB0070 Manufacturer NetApp Inc.'
    • https://kb.netapp.com/Legacy/NetApp_HCI/OS/H-series_compute_node_graphics_card_not_detected
      Applies to H-series compute nodes, such as H610C and H615C with graphics cards Issue In some scenarios, the graphics card might not be detected in the compute node.