The low critical and low warnings are -1C and the high warning is 48C and the high critical is 50C. When the warning levels are reached an AutoSupport will be generated and if the critical levels are ...The low critical and low warnings are -1C and the high warning is 48C and the high critical is 50C. When the warning levels are reached an AutoSupport will be generated and if the critical levels are reached the storage system will shutdown. Sensor 1 is in the shelf, sensor 2 is in the A module and Sensor 3 is in the B module. If the warning threshold is reached, a warning AutoSupport is generated and if the critical threshold is reached on a shelf it will not power off.
complete [from mgwd on node "<node_name>" (VSID: -1) to mgwd at took longer than 25 seconds to complete [from mgwd on node The BMC automatic or manual network-full firmware upgrade to 11.5 stops at 10...complete [from mgwd on node "<node_name>" (VSID: -1) to mgwd at took longer than 25 seconds to complete [from mgwd on node The BMC automatic or manual network-full firmware upgrade to 11.5 stops at 10%: Latest SP Firmware Update Start Timestamp: 7/10/2020 10:50:00 Latest SP Firmware Update Percentage Done: 10 Latest SP Firmware Update End Timestamp: 7/10/2020 10:50:40 Latest SP Firmware Update Start Timestamp: - Latest SP Firmware Update End Timestamp: -
Applies to All ONTAP platforms except the following: A900, A700, FAS9500, FAS9000 Description These models store the HA configuration as an environment variable. They are updated when the "ha-config m...Applies to All ONTAP platforms except the following: A900, A700, FAS9500, FAS9000 Description These models store the HA configuration as an environment variable. They are updated when the "ha-config modify" command is performed within maintenance mode. The environment variable should never be manually modified.
Thu Mar 05 11:20:05 CET [node_name: env_mgr: monitor.chassisFan.stop:error]: Chassis fan contains at least one stopped fan: FanB1 F1 at failed Thu Mar 05 11:20:05 CET [node_name: env_mgr: monitor.chas...Thu Mar 05 11:20:05 CET [node_name: env_mgr: monitor.chassisFan.stop:error]: Chassis fan contains at least one stopped fan: FanB1 F1 at failed Thu Mar 05 11:20:05 CET [node_name: env_mgr: monitor.chassisFan.stop:error]: Chassis fan contains at least one stopped fan: FanB1 F2 at failed Thu Mar 05 11:20:05 CET [node_name: env_mgr: monitor.chassisFan.stop:error]: Chassis fan contains at least one stopped fan: FanB1 F3 at failed