Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • How to setup the BMC and change the IP address on SolidFire Nodes
      https://kb.netapp.com/Legacy/NetApp_HCI/OS/How_to_setup_the_BMC_and_change_the_IP_address_on_SolidFire_Nodes
      This article describes the procedure to access BMC on the SolidFire/HCI node platforms and configure the settings. There are 3 options provided: from BIOS, with network cable, and from Element CLI (Ne...This article describes the procedure to access BMC on the SolidFire/HCI node platforms and configure the settings. There are 3 options provided: from BIOS, with network cable, and from Element CLI (NetApp Support only)