Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 4 results
    • Amber Warning LED due to 'Uncorrectable PCI Error'
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Amber_Warning_LED_due_to_Uncorrectable_PCI_Error
      Applies to FAS8300 Issue Controller has Amber LED lit due to an 'Uncorrectable PCI Error' Cluster::> system controller service-event show Node ID Event Location Event Description ---------------- --- ...Applies to FAS8300 Issue Controller has Amber LED lit due to an 'Uncorrectable PCI Error' Cluster::> system controller service-event show Node ID Event Location Event Description ---------------- --- ---------------------------------- ---------------------- Cluster-N1 1 PCIe Slot 2 Unrecoverable PCI Error SP event log shows the following 1e1 | 11/13/2020 | 13:11:04 | Unknown #0xb3 | | Asserted | absent FRU: MID1_FRU 1e2 | 11/13/2020 | 13:11:06 | Unknown #0xb3 | | Deasserted | absent FRU:
    • AFF and FAS series Disk amber LED ON with no fault observed
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/AFF_and_FAS_series_Disk_amber_LED_ON_with_no_fault_observed
      Applies to All disk drive models Drives that have failed, or are about to fail Issue Amber LED on for disk drive with no immediate fault observed May also occur following a reboot (Takeover / Giveback...Applies to All disk drive models Drives that have failed, or are about to fail Issue Amber LED on for disk drive with no immediate fault observed May also occur following a reboot (Takeover / Giveback)
    • Amber LED after disk replacement due to disk autoassign misconfiguration
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Amber_LED_after_disk_replacement_due_disk_autoassign_misconfiguration
      Applies to All FAS/AFF platforms. ONTAP 9 Issue After disk replacement the Amber LED is ON Fault status reported by drive: cluster::> system node run -node node1 -command storage show fault -v 18 [Bay...Applies to All FAS/AFF platforms. ONTAP 9 Issue After disk replacement the Amber LED is ON Fault status reported by drive: cluster::> system node run -node node1 -command storage show fault -v 18 [Bay 18]: OK 01,12,00,20 FAULT REQSTD
    • FAS8700, FAS8300, AFF A400 attention LED on - false positive
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/FAS8300__AFF_A400_attention_LED_on
      Attention (amber) LED is on without any hardware problem; Bug 1345804