The low critical and low warnings are -1C and the high warning is 48C and the high critical is 50C. When the warning levels are reached an AutoSupport will be generated and if the critical levels are ...The low critical and low warnings are -1C and the high warning is 48C and the high critical is 50C. When the warning levels are reached an AutoSupport will be generated and if the critical levels are reached the storage system will shutdown. Sensor 1 is in the shelf, sensor 2 is in the A module and Sensor 3 is in the B module. If the warning threshold is reached, a warning AutoSupport is generated and if the critical threshold is reached on a shelf it will not power off.
The shelf reports over-temperature on temprature sensor. Node1: dsa_worker3: ses.status.temperatureError:error]: DS224-12 (S/N SHFxxx) shelf 0 on channel 0b temperature error for Temperature sensor 11...The shelf reports over-temperature on temprature sensor. Node1: dsa_worker3: ses.status.temperatureError:error]: DS224-12 (S/N SHFxxx) shelf 0 on channel 0b temperature error for Temperature sensor 11: critical status; overtemperature failure. This module is on the rear of the shelf at the top left, on shelf module A. [ses.status.temperatureWarning:alert]: DS224-12 (S/N ***********) shelf 0 on channel 0b temperature warning for Temperature sensor 11: non-critical status.
Thu Apr 08 06:12:57 +0000 [node_name: dsa_worker2: ses.status.procCplxError:alert]: DS224-12 (S/N SHFNC0123456789) shelf 0 on channel 0b Processor Complex error for Processor Complex 1: PCM on partner...Thu Apr 08 06:12:57 +0000 [node_name: dsa_worker2: ses.status.procCplxError:alert]: DS224-12 (S/N SHFNC0123456789) shelf 0 on channel 0b Processor Complex error for Processor Complex 1: PCM on partner not installed This module is on the unknown location. This module is on the rear of the shelf at the top left, on shelf module A. This module is on the rear of the shelf at the top right, on shelf module B.
