The procedure to be followed to perform a system health check after a Data ONTAP upgrade or hardware replacement is described in this article. AutoSupports will need to be triggered from all nodes aft...The procedure to be followed to perform a system health check after a Data ONTAP upgrade or hardware replacement is described in this article. AutoSupports will need to be triggered from all nodes after the upgrade/replacement is complete.
The output of system health alert show command reports the same alert: Possible Effect: The nodes in the chassis might not function Refer to the Hardware specification guide for more information on th...The output of system health alert show command reports the same alert: Possible Effect: The nodes in the chassis might not function Refer to the Hardware specification guide for more information on the position of the field-replaceable unit (FRU) and ways to check or replace it. The missing FRUs are reported as unreachable by the affected node: The SP/BMC on the affected node is already on the latest version. The details may not be shown for the missing FRU under system chassis fru show
