Applies to BlueXP Copy & Sync Issue Cloud sync Data Broker shows status as unknown after installation: None of the sync relationship is working and getting error "failed to mount source".
Applies to ONTAP 9.12.1 and earlier SnapMirror Synchronous NDMP Issue While attempting to perform NDMP restore on a volume involved in a SnapMirror Synchronous relationship, the operation fails with t...Applies to ONTAP 9.12.1 and earlier SnapMirror Synchronous NDMP Issue While attempting to perform NDMP restore on a volume involved in a SnapMirror Synchronous relationship, the operation fails with the following error message: RESTORE: Error: Restore is not supported on a Sync SnapMirror endpoint.
Applies to Brocade Issue Problem while moving a switch port. The following error is generated: XXXXXXXXXXXX:FID128:admin> lscfg --config xxx -slot x -port This operation requires that the affected por...Applies to Brocade Issue Problem while moving a switch port. The following error is generated: XXXXXXXXXXXX:FID128:admin> lscfg --config xxx -slot x -port This operation requires that the affected ports be disabled. Would you like to continue [y/n]?: y Making this configuration change. Please wait... lscfg: The system is not ready for Logical Switch management operations. Please try again shortly.
