Cluster join fails with "Error: Remote ping test failed when attempting to ping <remote node cluster IP> from <local cluster IP>" To verify, run the ping command from the CLI to ensure each cluster in...Cluster join fails with "Error: Remote ping test failed when attempting to ping <remote node cluster IP> from <local cluster IP>" To verify, run the ping command from the CLI to ensure each cluster interface can ping all others. For example, "network ping -lif <local cluster lif> -vserver Cluster -destination <remote node cluster IP> -verbose true -show-detail true".
Applies to AFF-A150 FAS2750 2-node Switchless Cluster Issue Single cluster port is down ::> network port show Node: node_name Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Statu...Applies to AFF-A150 FAS2750 2-node Switchless Cluster Issue Single cluster port is down ::> network port show Node: node_name Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- a0a Default Default up 1500 auto/- healthy e0M Default Default up 1500 auto/1000 healthy e0a Cluster Cluster up 9000 auto/10000 healthy e0b Cluster Cluster down 9000 auto/- - e0c Default - up 1500 auto/10000 healthy
Applies to NetApp AFF and FAS systems ONTAP 9 Issue Cluster network port in a switch-less cluster setup is functioning at a lower speed (expected 10 G seen 100 M) refer to the Additional information s...Applies to NetApp AFF and FAS systems ONTAP 9 Issue Cluster network port in a switch-less cluster setup is functioning at a lower speed (expected 10 G seen 100 M) refer to the Additional information section for more details.
Applies to ONTAP 9 Switchless Cluster Description The following procedure describes how to verify switchless cluster configuration in a 2-node cluster.
