NetApp StorageGRID Appliance SG6000 NetApp StorageGRID Appliance SG1000 NetApp StorageGRID Appliance SG100 When trying to install a new StorageGRID compute node appliance, the compute node is stuck in...NetApp StorageGRID Appliance SG6000 NetApp StorageGRID Appliance SG1000 NetApp StorageGRID Appliance SG100 When trying to install a new StorageGRID compute node appliance, the compute node is stuck in a boot loop, and reports either of the following: boot device is not found. FlexBoot attempts to boot but then reboots. Attempts to boot from PXE / network boot then reboots. The NetApp logo screen may flash few times during a normal boot. This should not be considered part of the boot loop.
Applies to NetApp StorageGRID Appliance Models: SG100, SG1000 and SG6000 Answer Default BMC IP address: 192.168.0.120/24 Default Login Credentials: root/calvin Location of where the BMC port circled i...Applies to NetApp StorageGRID Appliance Models: SG100, SG1000 and SG6000 Answer Default BMC IP address: 192.168.0.120/24 Default Login Credentials: root/calvin Location of where the BMC port circled in red below: SG100 BMC management port SG1000 BMC management port SG6000 BMC management port Additional Information How to manage BMC users on StorageGRID SG6000 and SG1000 appliances via SSH How to reboot BMC only on StorageGRID SG6000 and SG1000 appliances Configuring the BMC Interface
Applies to StorageGRID SG6000 Appliances StorageGRID SG1000 Appliances Description This article describes how to configure a network on the BMC (Baseboard Management Controller) for the SG6000 and SG1...Applies to StorageGRID SG6000 Appliances StorageGRID SG1000 Appliances Description This article describes how to configure a network on the BMC (Baseboard Management Controller) for the SG6000 and SG1000 appliances.
Applies to NetApp StorageGRID Appliance SG6000 Description This article gives an overview on general troubleshooting steps when Fibre Channel (FC) related issues occur between the E-Series E2800 stora...Applies to NetApp StorageGRID Appliance SG6000 Description This article gives an overview on general troubleshooting steps when Fibre Channel (FC) related issues occur between the E-Series E2800 storage controller(s) and the StorageGRID SG6000 compute node
Applies to NetApp StorageGRID 11.5.0.8 and earlier NetApp StorageGRID 11.6.0.4 and earlier NetApp SG100, SG1000, and SG6000 appliances Issue After upgrading to StorageGRID 11.6.0.3 HIC's have been rem...Applies to NetApp StorageGRID 11.5.0.8 and earlier NetApp StorageGRID 11.6.0.4 and earlier NetApp SG100, SG1000, and SG6000 appliances Issue After upgrading to StorageGRID 11.6.0.3 HIC's have been removed or swapped on SG100, SG1000, and SG6000 appliances
Applies to NetApp StorageGRID Appliance SG6000 NetApp StorageGRID Appliance SG5700 Issue Post replacing SG6000/SG5700 compute node, it boots up in PGE instead of into the container.
Applies to StorageGRID SG6000 appliances StorageGRID SG1000 appliances Description This guide describes the options to reboot the BMC (Baseboard Management Controller) for SG6000 and SG1000 appliances...Applies to StorageGRID SG6000 appliances StorageGRID SG1000 appliances Description This guide describes the options to reboot the BMC (Baseboard Management Controller) for SG6000 and SG1000 appliances.