Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 6 results
    • Impact of applying or changing port set
      https://kb.netapp.com/on-prem/ontap/da/SAN/SAN-KBs/Impact_of_applying_or_changing_port_set
      When a portset is bound to an igroup, I/O from the initiators is restricted to only the LIFs in the portset. A change in a portset has the following impact on incoming operations to the LIFs that are ...When a portset is bound to an igroup, I/O from the initiators is restricted to only the LIFs in the portset. A change in a portset has the following impact on incoming operations to the LIFs that are removed from the portset. An excluded LIF is any LIF on the same SVM using the same data protocol that is zoned to the initiator. As a best practice, the initiators should be zoned so that they communicate with only the LIFs included in the portset.
    • FC LUN not visible on ESXi host
      https://kb.netapp.com/on-prem/ontap/da/SAN/SAN-KBs/FC_LUN_not_visible_on_ESXi_host
      Applies to FC Protocol ONTAP 9 Issue FC Lun is not visible on the host end via one of the paths
    • Initiator is not logged in to any network interfaces in portset
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Initiator_is_not_logged_in_to_any_network_interfaces_in_portset
      Applies to ONTAP 9.11+ VMware vSphere Issue ONTAP 9.11 alert displays the following. Initiator"00:00:00:00:00:00:00:00" is not logged in to any network interfacesin portset "FC_Portset1" on either nod...Applies to ONTAP 9.11+ VMware vSphere Issue ONTAP 9.11 alert displays the following. Initiator"00:00:00:00:00:00:00:00" is not logged in to any network interfacesin portset "FC_Portset1" on either node of the HA pair:"FAS1, FAS2, FAS3, FAS4".
    • Portset create failed with the error "No nodes are available to process the command. Verify that all nodes are healthy using the "cluster show" command, then try the command again"
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Portset_create_failed_with_the_error_No_nodes_are_available_to_process_the_command
      Applies to ONTAP 8 ONTAP 9 iSCSI Issue Unable to create portset: xxx-xxxxxxx::> portset add -vserver SVM_XXX -portset Portset-X -port-name iSCSI-LIFX Error: command failed: No nodes are available to p...Applies to ONTAP 8 ONTAP 9 iSCSI Issue Unable to create portset: xxx-xxxxxxx::> portset add -vserver SVM_XXX -portset Portset-X -port-name iSCSI-LIFX Error: command failed: No nodes are available to process the command. Verify that all nodes are healthy using the "cluster show" command, then try the command again.
    • UCS host is unable to see Boot LUN
      https://kb.netapp.com/on-prem/ontap/da/SAN/SAN-KBs/UCS_host_is_unable_to_see_Boot_LUN
      Applies to Cisco UCS ONTAP 9 FC Protocol Issue Unable to see boot LUN on UCS Host, preventing the host from booting.
    • Unable to add FCP LIF to portset after cluster network instability during ONTAP Headswap
      https://kb.netapp.com/on-prem/ontap/da/SAN/SAN-KBs/Unable_to_add_FCP_LIF_to_portset_after_cluster_network_instability_during_ONTAP_Headswap
      Applies to ONTAP 9 Issue Unable to add FCP lif to portset and will see one of the following Errors: NETAPP01::> portset add -vserver netapp_svm -portset fc_pset_1 -port-name fc_lif1 Error: command fai...Applies to ONTAP 9 Issue Unable to add FCP lif to portset and will see one of the following Errors: NETAPP01::> portset add -vserver netapp_svm -portset fc_pset_1 -port-name fc_lif1 Error: command failed: Timeout: Operation "portsetUpdate_addLifs_iterator::modify_imp()" took longer than 120 seconds to complete [from mgwd on node "NETAPP01" (VSID: -1) to bcomd at 127.0.0.1] Error: command failed: BCOMKA contains a duplicate entry