Applies to ONTAP 9 LIF on non-routed network (subnet) Description After ONTAP upgrade (including failover) a LIF cannot be reached by (some) clients, anymore Takeover and Giveback of the cluster nodes...Applies to ONTAP 9 LIF on non-routed network (subnet) Description After ONTAP upgrade (including failover) a LIF cannot be reached by (some) clients, anymore Takeover and Giveback of the cluster nodes, restored the access for the clients Root Cause Analysis did not reveal any issue on the ONTAP side (it was found that other clients on the same lif/network were able to connect)
Applies to ONTAP 9 Issue Following an ONTAP reboot (such as an upgrade), some LIFs are inaccessible from one or more clients Pings between impacted LIFs and clients fail Filer-side packet traces do no...Applies to ONTAP 9 Issue Following an ONTAP reboot (such as an upgrade), some LIFs are inaccessible from one or more clients Pings between impacted LIFs and clients fail Filer-side packet traces do not show evidence of clients responding to outbound traffic from the filer
Sun Feb 13 16:12:17 +0100 [node01: vifmgr: vifmgr.lifsuccessfullymoved:notice]: LIF node02-cifs (on virtual server 3), IP address 10.20.20.10, is now hosted on node node01, port a0d. Sun Feb 13 16:12:...Sun Feb 13 16:12:17 +0100 [node01: vifmgr: vifmgr.lifsuccessfullymoved:notice]: LIF node02-cifs (on virtual server 3), IP address 10.20.20.10, is now hosted on node node01, port a0d. Sun Feb 13 16:12:17 +0100 [node01: vifmgr: vifmgr.lifsuccessfullymoved:notice]: LIF node02-nfs (on virtual server 3), IP address 10.20.21.8, is now hosted on node node01, port a0d.
Because it is unable to connect to the NetApp NDMP Server on port 10000, the DMA is unable to configure NDMP hosts or backups. The failed attempts to connect to NDMP cause the DMA to return messages t...Because it is unable to connect to the NetApp NDMP Server on port 10000, the DMA is unable to configure NDMP hosts or backups. The failed attempts to connect to NDMP cause the DMA to return messages that suggest connection to the NetApp host failed, or that the host could not be reached. Some common cause for this error are: the computer name is typed incorrectly, the computer is not powered on, a Backup eec agent is not installed, or the network is improperly configured.