Applies to CN1610 FastPath 1.2.0.7 RCF 1.2 Issue Cluster network switch with all cluster ports down Switch ports not responding to shutdown / no shutdown Issue remains after CN1610 power cycle and reb...Applies to CN1610 FastPath 1.2.0.7 RCF 1.2 Issue Cluster network switch with all cluster ports down Switch ports not responding to shutdown / no shutdown Issue remains after CN1610 power cycle and reboot Issue remains after CN1610 FastPath 1.3.0.3 update
After adding a new disk shelf to the system, one of the disks has no LED lit , although the below two conditions are met: The disk is detected normally by ONTAP and the status is normal from "sysconfi...After adding a new disk shelf to the system, one of the disks has no LED lit , although the below two conditions are met: The disk is detected normally by ONTAP and the status is normal from "sysconfig -a" output as shown below: Cluster::> run -node <node-name> -command sysconfig -a The disk is seen in the spare pool after assigning it to a node: RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
