Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 4 results
    • Defective LED on H610S chassis
      https://kb.netapp.com/Legacy/NetApp_HCI/Hardware/Defective_LED_on_H610S_chassis
      Applies to NetApp H610S nodes Issue A LED showing the power status and/or network or disk activity is broken
    • RTFI fails on H610S with 'NVDIMMs are not armed'
      https://kb.netapp.com/Legacy/NetApp_HCI/Hardware/RTFI_fails_on_H610S_with_NVDIMMs_are_not_armed
      Applies to NetApp Element software NetApp H610S storage node Issue On screen RTFI error: UnhandledError pid=1 cmd=return 1 Error in rtfi.log: NVDIMMs are not armed! THIS IS A BAD STATE AND SHOULDN'T H...Applies to NetApp Element software NetApp H610S storage node Issue On screen RTFI error: UnhandledError pid=1 cmd=return 1 Error in rtfi.log: NVDIMMs are not armed! THIS IS A BAD STATE AND SHOULDN'T HAPPEN!!!! Sfnodereset fails with the same errors
    • Drive LEDs blinking amber on H610S due to BMC test failed
      https://kb.netapp.com/on-prem/solidfire/Element_OS_Kbs/Drive_LEDs_blinking_amber_on_H610S_due_to_BMC_test_failed
      NetApp H610S storage node BMC BIOS FW version 3.78 or earlier Amber LEDs are blinking on the drives without any drive errors in NetApp SolidFire Active IQ platformHardwareEvent - Ipmi SEL Event - Driv...NetApp H610S storage node BMC BIOS FW version 3.78 or earlier Amber LEDs are blinking on the drives without any drive errors in NetApp SolidFire Active IQ platformHardwareEvent - Ipmi SEL Event - Drive Slot / Bay HDD<X>, Rebuild In Progress platformHardwareEvent - Ipmi SEL Event - Drive Slot / Bay HDD<X>, Drive Fault platformHardwareEvent - Ipmi SEL Event - Drive Slot / Bay HDD<X>, Hot Spare Drive Slot / Bay #0xb7 | Drive Fault | Asserted Drive Slot / Bay #0xb7 | Drive Fault | Deasserted
    • Credentials not accepted on BMC UI login screen for H610S
      https://kb.netapp.com/on-prem/solidfire/Element_OS_Kbs/Credentials_not_accepted_on_BMC_UI_login_screen_for_H610S
      Applies to NetApp H610S NetApp Element software 11.7 Issue Credentials not accepted on BMC UI login screen No error messages appearing After confirming the credentials a "Processing" message appears a...Applies to NetApp H610S NetApp Element software 11.7 Issue Credentials not accepted on BMC UI login screen No error messages appearing After confirming the credentials a "Processing" message appears and then returns to the login screen with blank fields The reset password option is not available wget/curl no-certificate working on port 80/443 netcat (nc -zvw5) on port 22/80/443 not working: Connection refused