NetApp HCI Compute Nodes After powering on an HxxxC Compute node, the boot sequence halts with the following message: (runtime)Failing DIMM: DIMM location and Mapped-Out P2-DIMME2 When checking the Fa...NetApp HCI Compute Nodes After powering on an HxxxC Compute node, the boot sequence halts with the following message: (runtime)Failing DIMM: DIMM location and Mapped-Out P2-DIMME2 When checking the Failing DIMM status from within the nodes BMC/IPMI settings under the System / Hardware Information / DIMM tab, the Size is reported as 0 MiB instead of the actual size (e.g. Max Capable Speed: 2666 MHz Operating Speed: 2666 MHz Size: 0 MiB Serial No.: Firmware Build Time: System BIOS Build Time:
Applies to NetApp H410C NetApp H410S Issue Node panic and unresponsive with error in BMC event log Failing DIMM: DIMM location <DIMM location> After node reboot, the DIMM with error will work normally...Applies to NetApp H410C NetApp H410S Issue Node panic and unresponsive with error in BMC event log Failing DIMM: DIMM location <DIMM location> After node reboot, the DIMM with error will work normally Note: Error screenshot under Additional Information
