Service Processor (SP) Node reports the following error in event logs: [NODE1: servprocd: sp.dhcp.failure:error]: Service Processor cannot obtain network configuration using DHCP. DHCP is enabled but ...Service Processor (SP) Node reports the following error in event logs: [NODE1: servprocd: sp.dhcp.failure:error]: Service Processor cannot obtain network configuration using DHCP. DHCP is enabled but no IP address is configured on the SP: ::> run -node node1 -command sysconfig -a Service Processor Status: Online Mgmt MAC Address: 00:XX:XX:XX:XX:38 Ethernet Link: up, full duplex, auto-neg complete Using DHCP: yes IPv4 configuration: IP Address: unknown IPv6 configuration: Disabled