Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • Unable to access H410S IPMI via shared port after power drain
      https://kb.netapp.com/on-prem/solidfire/hardware_Kbs/Unable_to_access_H410S_IPMI_via_shared_port_after_power_drain
      Applies to NetApp H410S No Ethernet cable is connected to IPMI dedicated port Usually use Bond1G ports to access IPMI Web GUI Note: Using IPMI shared port instead of IPMI dedicated port for ongoing us...Applies to NetApp H410S No Ethernet cable is connected to IPMI dedicated port Usually use Bond1G ports to access IPMI Web GUI Note: Using IPMI shared port instead of IPMI dedicated port for ongoing use is not recommended. Issue IPMI Web GUI does not show up after performing a power drain Response for ping to IPMI IP address is unstable