Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • https://kb.netapp.com/on-prem/ontap/da/NAS/NAS-KBs/Is_it_possible_to_set_the_Junction_Path_before_performing_the_first_transfer_for_the_DP_volume_created_as_the_Snapmirror_destination
      Applies to ONTAP 9 SnapMirror NDMP Answer Although it is possible to set the Junction Path for the SnapMirror Destination volume before the initial transfer, it is usually set after the transfer. Howe...Applies to ONTAP 9 SnapMirror NDMP Answer Although it is possible to set the Junction Path for the SnapMirror Destination volume before the initial transfer, it is usually set after the transfer. However, even if configured, data access through the Junction Path will not be possible until the initial transfer is complete and the volume is ready for reading/writing. Additional Information additionalInformation_text