Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • https://kb.netapp.com/on-prem/ontap/da/SAN/SAN-KBs/The_sanlun_lun_show_p_command_reports_stale_paths
      The sanlun lun show -p command reports stale paths. [root@dbsvr01:/]# sanlun lun show -p Host Device: hdisk9 path path MPIO host vserver path up secondary path2 fcs3 SVR004_1c 1 up secondary path8 fcs...The sanlun lun show -p command reports stale paths. [root@dbsvr01:/]# sanlun lun show -p Host Device: hdisk9 path path MPIO host vserver path up secondary path2 fcs3 SVR004_1c 1 up secondary path8 fcs0 SVR004_2c 1 up primary path9 fcs0 SVR005_2c 1 up secondary path10 fcs2 SVR004_2c 1 up primary path11 fcs2 SVR005_2c 1 The lspath command also shows stale paths. Enabled hdisk9 fscsi3 Enabled hdisk9 fscsi1 Missing hdisk9 fscsi0 Missing hdisk9 fscsi2 Enabled hdisk9 fscsi0 Enabled hdisk9 fscsi2