The 'sanlun lun show -p' command reports stale paths

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Views:: 454

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: san

Last Updated:

Applies to

ONTAP 9.3P21
AIX 7.2
Host Utility 6.1

Issue

The sanlun lun show -p command reports stale paths.

Example:

[root@dbsvr01:/]# sanlun lun show -p

ONTAP Path: SVR01:/vol/vol06/lun06 LUN: 6 LUN Size: 600.1g Host Device: hdisk9 Mode: C Multipath Provider: AIX Native Multipathing Algorithm: round_robin --------- ----------- ------ ------- ---------------------------------------------- ---------- host vserver AIX AIX MPIO path path MPIO host vserver path state type path adapter LIF priority --------- ----------- ------ ------- ---------------------------------------------- ---------- up secondary path2 fcs3 SVR004_1c 1 up primary path3 fcs3 SVR005_1c 1 up secondary path0 fcs1 SVR004_1c 1 up primary path1 fcs1 SVR005_1c 1 down path4 fcs0 1 down path5 fcs0 1 down path6 fcs2 1 down path7 fcs2 1 up secondary path8 fcs0 SVR004_2c 1 up primary path9 fcs0 SVR005_2c 1 up secondary path10 fcs2 SVR004_2c 1 up primary path11 fcs2 SVR005_2c 1

The lspath command also shows stale paths.

Example:

[root@dbsvr01:/]# lspath

Enabled hdisk9 fscsi1 Enabled hdisk9 fscsi1 Enabled hdisk9 fscsi3 Enabled hdisk9 fscsi3 Missing hdisk9 fscsi0 Missing hdisk9 fscsi0 Missing hdisk9 fscsi2 Missing hdisk9 fscsi2 Enabled hdisk9 fscsi0 Enabled hdisk9 fscsi0 Enabled hdisk9 fscsi2 Enabled hdisk9 fscsi2 Enabled hdisk9 fscsi3 Enabled hdisk9 fscsi3 Enabled hdisk9 fscsi1 Enabled hdisk9 fscsi1 Missing hdisk9 fscsi0 Missing hdisk9 fscsi0 Missing hdisk9 fscsi2 Missing hdisk9 fscsi2 Enabled hdisk9 fscsi0 Enabled hdisk9 fscsi0 Enabled hdisk9 fscsi2 Enabled hdisk9 fscsi2