Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Command_fails_when_attempting_to_manually_set_port_speed
      Command fails when attempting to manually configure port speed. Port is capable of desired speed Command fails with output similar to the following: ::> network port modify -node Node-01 -port e0c -mt...Command fails when attempting to manually configure port speed. Port is capable of desired speed Command fails with output similar to the following: ::> network port modify -node Node-01 -port e0c -mtu 1500 -autonegotiate-admin false -duplex-admin full -speed-admin 1000 -flowcontrol-admin full Warning: This command will cause a several second interruption of service on this network port. Error: command failed: Port speed settings greater than 100Mb are not supported.