Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • https://kb.netapp.com/on-prem/E-Series/Management-Apps-KBs/Sending_SNMP_test_trap_fails
      Sending SNMP trap destination test message via Santricity System Manager GUI fails with the following error: The operation cannot be completed because the specified SNMP trap destination is not reacha...Sending SNMP trap destination test message via Santricity System Manager GUI fails with the following error: The operation cannot be completed because the specified SNMP trap destination is not reachable with the current controller IPV4 network configuration. (1) IPV4 is not enabled on at least one port with an active connection on each controller OR (c) the IP address of the controller and the specified trap destination address are not part of the same subnet