This article includes instructions on enabling and configuring SNMP v3 in cluster mode and getting DFM to recognize SNMP v3 in clustered Data ONTAP. Please choose an authentication protocol (none, md5...This article includes instructions on enabling and configuring SNMP v3 in cluster mode and getting DFM to recognize SNMP v3 in clustered Data ONTAP. Please choose an authentication protocol (none, md5, sha) [none]: md5 Note: The Error below occurs when the Authentication type of the SNMP host does not match the type ( -authmethod) selected for the Enabled SNMPv3 user account created above: Note: SNMP v3 in DFM requires a username with a password (eight characters in length).
This article provides instructions on enabling and configuring SNMPv3 from the ONTAP command line. Managing SNMP on the cluster > Configuring SNMPv3 users in a cluster Configuring SNMPv3 users in a cl...This article provides instructions on enabling and configuring SNMPv3 from the ONTAP command line. Managing SNMP on the cluster > Configuring SNMPv3 users in a cluster Configuring SNMPv3 users in a cluster > Examples for different security levels To configure from System Manger use Adding an SNMPv3 security user For MetroCluster switch monitoring, follow the procedures in the MetroCluster installation guide MetroCluster-IP / fabric-attached MetroCluster
