Skip to main content
NetApp Knowledge Base

How to enable FC-NVMe on Windows

  1. Last updated
  2. Save as PDF
Views:
1,128
Visibility:
Public
Votes:
1
Category:
fc-series
Specialty:
san
Last Updated:

Applies to

  • Broadcom 32G FC adapters
  • NVMe/FC on Windows OS
  • Windows 2K12-R2
  • Windows 2K16
  • Windows 2K19.

Description

This KB article details the steps for enabling the NVMe/FC on Windows OS.

At the time of writing this KB, the versions listed in this article are the current supported versions. However, because NVMe/FC is under rapid development, versions can change and the number of items qualified will continue to expand rapidly. For this reason, and because it is always a best practice, always check the IMT and adjust versions and hardware specifications to those listed in the IMT.

Supported Configs

  • OS: Windows 2K12-R2,Windows 2K16 and Windows 2K19.
  • HBA’s: Broadcom 32G FC adapters (i.e. LPe3200X) used for NVMe/FC support as initiator and targets
Protocol Co-existent Host Configs
  • The Broadcom initiator can serve both NVMe/FC and FC-SCSI traffic through the same 32G FC adapter ports. In fact, that is expected to be the commonly deployed host config for end users.
  • For FCP (FC-SCSI) and FC/NVMe, Use MSDSM as the MPIO option.
Host Bus Adapter (HBA)
  • 32G FC Broadcom/Emulex LPe3200X adapters used as NVMe/FC initiators and targets.
  • LPe3200X firmware v12.6.182.8 available on the Broadcom site.
  • LPe3200X Driver v12.6.165.0 available on the Broadcom site.

 For Latest driver/firmware support check IMT.

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.