Node accessible via HA-IC, but cluster access failed during cluster switch migration
Applies to
- Switchless cluster to BES-53248 cluster switch conversion
Issue
- Following the below procedure to migrate from 2 node switchless cluster to switched cluster with BES-53248 cluster switches:
Migrate to a switched NetApp cluster environment using Broadcom-supported BES-53248 cluster switches
- Each node has e0a cluster port connected to new cluster switch cs1
- The e0b cluster ports are still connected to each other
- There is a link error (port flapping due to faulty cable) on one of the links connected to the new switch
- The following is seen on the affected node:
cluster1::> storage failover show
Takeover
Node Partner Possible State Description
-------------- -------------- -------- -------------------------------------
cluster1-01 cluster1-02 true Connected to cluster1-02.
cluster1-02 cluster1-01 - Up. Node accessible via HA-IC, but
cluster access failed
- Data may stop being served by this node or by indirect access to this node