Skip to main content
NetApp Knowledge Base

How to modify the home port and/or home node of an existing clustered ONTAP logical interface serving a SAN/ block protocol

Views:
4,811
Visibility:
Public
Votes:
1
Category:
clustered-data-ontap-8
Specialty:
san
Last Updated:

Applies to

  • Clustered Data ONTAP 8

Description

During normal operations, there is no need for SAN logical interfaces (LIFs) to move from one cluster node or physical port to another, but there are several circumstances in which non-disruptive migration of LIFs might be required:

  • Replacing an HA pair of a clusters with an upgraded HA pair so that it transparent to the hosts accessing the LUN data
  • Upgrading a target interface card to a faster or more capable model
  • Shifting a Vserver’s resources from a set of nodes in a cluster to another

In this way, the administrative burden of rezoning a Fibre Channel fabric or creating new iSCSI sessions between a cluster’s attached hosts and its new target interface can be avoided.

Unlike logical interfaces with NAS protocols, an LIF that has been assigned a SAN data protocol cannot be migrated by running the network interface migrate command. However, if the LIF is brought offline first, it can be modified to have a different home node or port, and brought online again, thus resuming I/O in its new location. This does involve an interruption in I/O on the LIF to be moved, but since redundant paths and automatic path selection through ALUA are part of any clustered ONTAP SAN solution; this should simply cause hosts to retry and then move  I/O to another LIF.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.