Skip to main content
NetApp Knowledge Base

Failed to modify enable_cold_data_reporting, because it has auto adaptive compressed volumes

Views:
2,014
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

  • ONTAP 9.8 and above
  • FabricPool
  • Temperature Sensitive Storage Efficiency (TSSE)
  • Inactive Data Reporting

Issue

When trying to configure inactive data reporting, following error is displayed:

::> storage aggregate modify aggr1 -is-inactive-data-reporting-enabled true

Error: command failed: Failed to modify enable_cold_data_reporting of aggregate "aggr1". 
Reason: Operation is not allowed on aggregate aggr1 because it has auto adaptive compressed volumes. 
Fields that were modified: none

Starting with ONTAP 9.10, the error message is corrected and will be reporting as below:

Error: command failed: Failed to modify enable_cold_data_reporting of aggregate "aggr1".
Reason: Operation is not allowed on aggregate test_aggr_2 , Since the aggregate contains auto adaptive compressed volumes.
Aggregate containing auto adaptive compressed volumes have inactive data reporting already turned on. Fields that were modified: none

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.