Skip to main content
NetApp Knowledge Base

The "cluster peer health show" intermittently displays "session reachable" for data ping in clustered Data ONTAP

Last Updated:

Applies to

  • Product Model: All FAS and V-Series running clustered Data ONTAP 8.3
  • OS: Clustered Data ONTAP 8.3 or later  


The cluster peer health show command displays session_reachable for Data Ping status for one or more node pairs in a cluster peer relationship. In the following example, local node NETAPP-02 reports a session_reachable Data Ping status between it and remote node DRNETAPP-01.

NETAPP01::> cluster peer health show
Node       Cluster-Name                 Node-Name

            Ping-Status                RDB-Health Cluster-Health Availability
---------- --------------------------- --------- --------------- ------------
           DRNETAPP01                   DRNETAPP01-01
            Data: interface_reachable
            ICMP: interface_reachable  true      true           true
            Data: interface_reachable
            ICMP: interface_reachable  true      true           true
           DRNETAPP01                   DRNETAPP01-01
            Data: session_reachable
            ICMP: interface_reachable  true      true           true
            Data: interface_reachable
            ICMP: interface_reachable  true      true           true
4 entries were displayed.

A session_reachable Data Ping status for one or more node pairs will cause the cluster peer relationship to report Partial availability, as displayed in the cluster peer show command.
NETAPP01::> cluster peer show
Peer Cluster Name         Cluster Serial Number  Availability    Authentication
------------------------- ---------------------  --------------  --------------
DRNETAPP                  0-00-000000            Partial         ok

The Partial availability of the cluster peer relationship may block certain operations in management software such as OnCommand System Manager or the 7-Mode Transition Tool (7MTT).

In most cases of a session_reachable Data Ping status, the issue will be intermittent and SnapMirror will continue to function; however, the session_reachable status might also be present with Cluster Session Manager (CSM) connection failures, cluster peer connection drops, or SnapMirror aborts, such as the following logs viewable via the event log show command:

Sun Jan 01 2016 00:00:20 -05:00 [cpeer.unavailable:ALERT] Peer cluster DRNETAPP01 is no longer available.

Sun Jan 01 2016 00:00:40 -05:00 [csm.sessionFailed:warning] Cluster interconnect session (req=NETAPP01-01:dblade, rsp=DRNETAPP01-02:dblade, uniquifier=0f01234567890abc) failed with record state ACTIVE and error CSM_CONNABORTED.

Sun Jan 01 2016 00:00:50 EST 2016 ScheduledUpdate[Jan 12 22:15:00]:12345678-1234-1234-1234-123456789012 action=Defer source=SVMSource:SourceVol destination=SVMDestination:DestinationVol status=Failure message=Failed to start transfer for Snapshot copy "snapmirror.01234567-1234-1234-1234-123456789012_0123456789.2016-01-01_000040".(Failed to start transfer.(Replication operation request failed from Cluster Id: 12345678-1234-1234-1234-123456789012, Node Id: 12345678-1234-1234-1234-123456789012 to Cluster Id: 12345678-1234-1234-1234-123456789012, Node Id: 12345678-1234-1234-1234-123456789012 due to a network error(CSM: An operation did not complete within the specified timeout window.)))



Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support