Skip to main content
NetApp Knowledge Base

Remote disks missing after switch firmware upgrade

Views:
177
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • AFF-A220
  • MetroCluster IP
  • Backend switch upgrade
  • ONTAP <9.7P15
  • ONTAP <9.8P6
  • ONTAP <9.9.1P1

Issue

After switch firmware upgrade aggregate is showing as degraded and disks are reported as missing/failed on remote plex
 
cluster::>aggr show-status
 
Aggregate aggr1 (online, raid_dp, mirror degraded, fast zeroed) (block checksums)
Plex /aggr1/plex0 (online, normal, active, pool0)
RAID group /aggr1/plex0/rg0 (normal, block checksums)

RAID Disk    Device        HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
---------    ------        ------------- ---- ---- ---- ----- --------------    --------------
dparity     0b.50.0P2     0b    50  0   SA:B   0   SSD   N/A 445732/912859136  445740/912875520 (fast zeroed)
..
data        0b.50.22P1    0b    50  22  SA:B   0   SSD   N/A 445732/912859136  445740/912875520 (fast zeroed)

Plex /aggr1/plex1 (offline, failed, inactive, pool1)
RAID group /aggr1/plex1/rg0 (partial)

RAID Disk    Device        HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
---------    ------        ------------- ---- ---- ---- ----- --------------    --------------
dparity    FAILED            N/A                        445732/ -
parity    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
data    FAILED            N/A                        445732/ -
Raid group is missing 23 disks.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.