Skip to main content
NetApp Knowledge Base

Node fails to boot with error message "mcc.drsom.fsm.invalidState" in MetroCluster system

Views:
203
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • MetroCluster
  • ONTAP 9

Issue

A node of MetroCluster fails to boot with error message mcc.drsom.fsm.invalidState

Example:
 
NetApp Data ONTAP 9.1P2
 
Trying to mount root from msdosfs:/dev/da0s1 [ro]...
md0 attached to /X86_64/freebsd/image2/rootfs.img
Trying to mount root from ufs:/env/md0.uzip []...
mountroot: waiting for device /env/md0.uzip ...
Copyright (C) 1992-2017 NetApp.
All rights reserved.
Writing loader environment to the boot device.
Loader environment has been saved to the boot device.
*******************************
* *
* Press Ctrl-C for Boot Menu. *
* *
*******************************
Attempting to use existing varfs on /dev/nvrd1
No SVM keys found.
Firewall rules loaded.
Feb 08 22:51:22 Battery charge capacity: 3328 mA*hr. Power outage protection flash de-staging cycles: 100
Feb 08 22:52:42 [cluster:fcvi.update.link.state:notice]: FC-VI adapter: Physical link is up on port 1a.
Ipspace "ACP" created
Feb 08 22:52:42 [cluster:fcvi.update.link.state:notice]: FC-VI adapter: Physical link is up on port 1b.
Feb 08 22:52:42 [cluster:fcvi.qlgc.rmt.link.up:notice]: FC-VI adapter: Link to partner node over port 1a is up. Partner port id = 0xe8, partner node's system id = 0.
Feb 08 22:52:42 [cluster:fcvi.qlgc.rmt.link.up:notice]: FC-VI adapter: Link to partner node over port 1b is up. Partner port id = 0xe8, partner node's system id = 0.
Feb 08 22:52:42 [cluster:fcvi.qlgc.received.reject:notice]: FC-VI adapter: Connect request rejected on port 1b. QP name = Control, QP index = 1, Remote node's system id = xxxxxx.
WAFL CPLEDGER is enabled. Checklist = 0x7ff841ff
Feb 08 22:52:49 [cluster:mcc.drsom.fsm.invalidState:error]: DRSOM FSM event (set_sb_recovery_pending) generated in state (switchover_complete) will cause an invalid FSM state transition.
Uptime: 2m1s
System halting...

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device