Skip to main content
NetApp Knowledge Base

MetroCluster ConfigAdvisor port speed setting errors

  1. Last updated
  2. Save as PDF
Views:
176
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • MetroCluster
  • MetroCluster Plugin for ConfigAdvisor

Issue

ConfigAdvisor shows one of the following messages:

  • Port(s)<port lists> connecting storage initiator (HBA) has speed not set to fixed speed.
  • No Active FCVI adapters found
  • Switch connecting FC-VI interconnect have speed not set to a fixed value.
  • Port(s) <port lists> connecting ATTO bridge of type <port-type> working Speed and Expected Speed are not same.
  • Ports of type E-port is not operating at fixed speeds.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.